TEST CRITERIA
MASH TL3 Crash Test Evaluation
MASH Test Level (TL) 3 nominates two (2) vehicle impacts performed at 100 km/h and 25 degrees. The 1100 kg passenger car crash test (3-10) primarily evaluates occupant risk and potential for the vehicle to snag or underride the safety barrier system. The 2270 kg pickup truck impact (3-11) evaluates the capacity of the barrier system, determining the maximum dynamic deflection and the ability of the barrier to provide stable vehicle containment and redirection.
Test
Vehicle
Impact Speed
Impact Angle
Impact Severity
3-10
1100C passenger car
100 km/h
25 degrees
75.8 kJ
3-11
2270P pick-up truck
100 km/h
25 degrees
156.4 kJ
The underlying philosophy in the development of the MASH TL3 guidelines is that of “worst practical conditions.” When selecting test parameters, such as the test vehicle, impact speed and angle combination, every effort is made to specify the worst, or most critical, conditions. For example, only two percent of vehicles weigh less than the specified 1100 kg passenger car. The impact speed and angle combination represents approximately the 93rd percentile of real-world crashes, i.e., only seven percent of crashes are more severe.
Visit MASH compliance for more information.
Our Range
RamShield W-Beam
The benchmark for MASH TL3 w-beam guardrail systems providing stable vehicle containment and low occupant risk. The patented guardrail release mechanism of RamShield W-Beam eliminates the requirement for blocking pieces and simplifies installation.
RamShield Median
A back-to-back w-beam guardrail system designed to withstand a MASH TL3 vehicle collision from either side. Designed to prevent dangerous cross-median vehicle collisions. The strength of the RamShield Median C-posts limits dynamic deflection.
RamShield Low Deflection
A stiffer w-beam variant featuring heavy duty C-posts designed to strengthen the system and limit the lateral deflection during a MASH TL3 impact. RamShield Low Deflection Can be installed with or without blocking pieces to suit site specific requirements.
RamShield High Containment
Featuring thriebeam guardrail supported by heavy duty C-posts, the strength of RamShield High Containment is designed to withstand high-energy vehicle impacts. Crash tested to MASH TL3 and TL4.
RamShield Edge
A variant of RamShield High Containment, RamShield Edge features a driven pin that restrains each post below ground level allowing for installation on the hinge point of a 1:1 weak soil embankment.
RocketBloc
A steel blocking piece that is retrofitted to legacy Australian public domain guardrail (G4). The substitution of the G4 blocking piece with RocketBloc elevates the barrier compliance to MASH TL3.
MSKT Terminal
An energy-absorbing, tangential guardrail end terminal designed to minimise the severity of impacts occurring near the end of the guardrail safety barrier. The MSKT is crash tested in accordance with MASH TL3.
RamShield Transition
A MASH TL3 interface that reduces the potential for vehicle pocketing and snagging when connecting a guardrail barrier to a concrete parapet or similar rigid barrier system.
CrocGuard Culvert Barrier
A modular, freestanding barrier system capable of spanning up to 16m. Designed for bridges and culverts, the construction of CrocGuard features a thriebeam guardrail shell filled with concrete.
HammerBeam
HammerBeam combines the strength of thriebeam guardrail with the yielding behaviour of a RamShield w-beam post, reducing the potential for damage to the bridge or culvert structure.
VGAN 400 Bridge Barrier
VGAN 400 is a lightweight aluminum barrier system designed to shield errant vehicles when installed on the edge of a bridge or culvert structure.
Frequently Asked Questions
What impact speed is specified for MASH TL3 crash testing?
MASH TL3 nominates two (2) vehicle impacts, a 1100 kg passenger car and a 2270 kg pick-up truck travelling at 100 km/h impact the barrier system at 25 degrees.
Are MASH TL3-compliant barriers suitable for installation on roadways with a post speed of 110 km/h?
Yes. The MASH TL3 crash test conditions considers the combination of vehicle impact speed and vehicle impact angle. Whilst a pot speed may lead to a higher speed impact, it is likely to occur at a lower impact angle.
Can a MASH TL3-compliant device be installed in a lower speed environment?
Yes. The MASH TL3 crash test evaluation is designed to represent the worst practical condition placing the highest lateral load on the barrier system. Impacts at lower speed will typlically result in lower barrier deflections and reduced occupant risk.
