- Home
- Products
- Bridge & Culverts Barriers
- Hammer Beam
HammerBeam® Bridge and Culvert Barrier
Preventing Damage to the Bridge or Culvert Structure
HammerBeam® Bridge and Culvert Barrier
An important design consideration in the installation of a guardrail barrier on an elevated structure is the prevention of damage to the structure following a vehicle impact with the barrier. The unique design of HammerBeam® combines the stiffness of thrie-beam guardrail with lightweight RamShield® posts.
During a vehicle collision the strength of the HammerBeam® thrie-beam panels limits dynamic deflection as the RamShield® posts yield when contacted by the errant vehicle. The yielding action of the posts reduces forces transferred to the elevated structure preventing damage.
HammerBeam® may be installed with side-mounted or surface-mounted posts. The side-mounted posts are placed into the socket of the mounting bracket facilitating rapid installation and repair. The side mounted bracket aligns the thrie-beam guardrail with the edge of the elevated structure preventing encroachment of the barrier into the traffic lane.
Product Features
| MASH TL3 Compliant | Contains a 2,270 kg pick-up at 100 km/h. |
|---|---|
| ASBAP Approved | Recommended for acceptance by the Austroads Safety Barrier Assessment Panel. |
| Leading Safety | Crash tested mounted to an elevated concrete beam edge. |
| Superior Design | The yielding RamShield® post protects the bridge or culvert structure. |
| Simplified Installation | Built from standard thrie-beam guardrail and RamShield® posts. |
Video
Frequently Asked Questions
What are the risks associated with the installation of conventional rigid post guardrail barriers on elevated concrete structures?
A rigid post guardrail system is typically limited in strength to the capacity of the anchor bolts. The rigid characteristics of these barriers transfer vehicle impact loads directly to the anchor bolts. This often results in pullout of the anchors causing damage to the concrete structure which can lead to the ingress of moisture, corrosion of steel reinforcement and a reduction in the life span of the structure.
What are the advantages in installing HammerBeam® in preference to a rigid post system?
HammerBeam® features thrie-beam guardrail supported by RamShield® posts. The RamShield® post is designed to yield during a vehicle collision and absorb impact energy. This yielding behaviour reduces the impact loads transferred to the anchor bolts and prevents damage to the elevated concrete structure.
Is HammerBeam® suitable for installation along the edge of an elevated concrete structure?
Yes. HammerBeam® has been crash tested when installed along the edge of an elevated concrete structure. In all crash test impacts the errant vehicle was safely contained and redirected as the thrie-beam guardrail deflected beyond the edge of the structure.
Is HammerBeam® suitable for installation behind a concrete hob?
Yes. The crash testing of HammerBeam® along the edge of an elevated concrete structure included placement behind a 200 mm high hob. In all crash test impacts the errant vehicle was safely contained and redirected.
Was there any observed damage to the anchor bolts during crash testing?
No. In all crash test impacts the yielding of the RamShield® posts absorbed impact energy and prevented damage and movement of the anchors.
What is the crash tested capacity of HammerBeam®?
HammerBeam® is MASH Test Level 3 (TL3) compliant demonstrating containment of a 2270 kg pick-up truck travelling at 100 km/h and 25 degrees.
Why does the design of HammerBeam® feature thrie-beam guardrail?
The additional corrugation in the thrie-beam rail combined with the higher mounting height, stiffens the barrier and improves its ability to contain larger vehicles. The wider lateral catching area reduces the potential for vehicle override or underride and improves vehicle stability during impact.
How are the side-mounted posts installed?
The side mount option features a bracket containing a recess for insertion of the RamShield® post. Once the bracket is secured to the side of the structure, the standard length RamShield® post (1560 mm) is cut to the required length on site and inserted into the recess.
Can the HammerBeam® post be mounted to the surface of the elevated concrete structure?
Yes. HammerBeam® may be installed with posts on baseplates secured to the top of an elevated concrete structure at sites where access to the side of the structure may be restrictive.
What is the spacing of the HammerBeam® posts?
The spacing of both side-mounted and surface-mounted posts is 2 m centres.
How is HammerBeam® connected to upstream and downstream w-beam guardrail barrier?
Since HammerBeam® features thrie-beam guardrail positioned 1 m above road level, the installation of an asymmetric transition panel is required for connection to w-beam guardrail. The asymmetric transition panel lowers the height of the system by approximately 200 mm providing compatibility with RamShield® W-Beam or the MSKT guardrail end terminal.
